| Title: | PrintServer_Hardware |
| Moderator: | CSCMA::SMITH |
| Created: | Fri Aug 23 1991 |
| Last Modified: | Mon Jun 02 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 487 |
| Total number of notes: | 1804 |
Hi,
I need to connect a Printserver 20 in WINDOWS NT
Is posible configure this printer with a TCP/IP adress ?
Needs another aplication????
Thanks
Diego
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 481.1 | If the LPS printer is booted from VMS.... | NECSC::HARVEY | Printserver Support- America's Zone | Wed Mar 26 1997 16:43 | 22 |
Diego,
What is needed is what platform is booting the LPS printer.If it is
a VMS machine then there is a Utility that can be used to configurre a
LPS printer with an IP address. It is invoked by:
@sys$manager:LPS$CONFIG.COM
Just select the line number to change the IP address. Or set your
default to LPS$SUPPORT. In this directory will be a file called
lpsconfig."node_name_of_printer". Edit this file and change the ip
address field from none to the addres you want to assign it. Add tow
other fields:
subnetmask 255.255.255.0 "Or the correct one for ypur subnet"
gateway "gatway or router ip address"
Reboot the LPS printer and it will now take on the ip address.
Renis
| |||||
| 481.2 | TENGO UN PURO | IB004::DIEGOR | DRODRIGUEZ Tengo un puro | Thu Mar 27 1997 05:23 | 6 |
Thank you for your information
Regards
Diego
| |||||