| Title: | PrintServer_Hardware |
| Moderator: | CSCMA::SMITH |
| Created: | Fri Aug 23 1991 |
| Last Modified: | Mon Jun 02 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 487 |
| Total number of notes: | 1804 |
Hi, could anyone tell me if the following system printers
able to use with RapidPrint 200 and RapidPrint 500, to provide
printing via LAT from VAX host and via TCP/IP from Windows NT system
concurrently.
a) LG12
b) LG01
c) LP27
Presently, these printers are served by VAX host via LAT. Do I
need special cables for connection to RP200 and RP400 ?
Thanks.
THS
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 477.1 | CSCMA::KOECK | Wed Feb 26 1997 10:10 | 4 | ||
Sorry, but most of the folks that folow this notesfile don't
support any of thoes printers, or the RapidPrint 200.
Tom
| |||||
| 477.2 | CSCMA::SMITH | Wed Feb 26 1997 10:27 | 2 | ||
Try humane::postscript_printing, they would most likely be able to
help.
| |||||
| 477.3 | yes, it is supported | GIDDAY::PUDIPEDDI | Tue Mar 04 1997 23:34 | 17 | |
HI,
From the SOC may1996, yes the Rapid Print 200 supports multiple,
concurrent network protocols including Novell, Apple, LAT, and
TCP/IP.
We have customers using LP27s on RP200. The only thing to take care
is that the RP200 should be running at firmware ver 1.1.8 for these
printers to work properly. We can still use the same parallel cables
(BC27A-xx). There is a config set up in the box and we need to setup
as to what type of printer it is talking to, such as dataproducts,
centronics etc.
Hope this helps
Subu
Sydney Support
| |||||