Conference mvblab::sable

2554.0. "DNSES cable part number?" by OTOOA::JPOND () Thu Mar 13 1997 17:40

    I have a cabling issue with a DNSES. I don't really know of a better
    place to ask this because I've never really found a good conference
    that discusses this sort of thing (if there is, let me know).
    
    Anyway, the DNSES ships with a Y-Cable. The end that plugs into the
    DNSES itself is a 100-pin 2-row male D-style connector, and the other
    two arms of the "Y" are 50-pin 3-row maile D-style connectors. 
    
    I have a customer that wants to connect to CPE that has a female DB25;
    in other words, he needs a cable with a male DB25 on one end and a
    female 50-pin 3-row d-style connector on the other end to connect to
    the Y-cable that comes with the DNSES.
    
    Can someone give me a part number for such a beast?  Thanks in advance,
    Jim

	RE .0

	The correct adapater cable is a BC19D-02. There are two newer 
cable numbers, BS19D-02 and BS23V-02.  The BS19D-02 is a kit of a 
BC19D-02 and Female DB25 to Male DB25 adapter block (12-27591-01). 
The DB25 adapter block is used to remove 3 signals that are supported 
on the BC19D-02 but interfere with some devices. The BS23V-02 is 
similar to the BS19D-02 but it uses a newer base cable, BC23G-02, 
plus the same DB25 adapter block. 

	\Bob Lail

    Thanks Bob.
    Jim