[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference irocz::terminal_servers

Title:Terminal Servers
Notice:See Note 2 for Directory of important notes. Please use keywords.
Moderator:LAVC::CAHILLON
Created:Tue May 14 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:3547
Total number of notes:12300

3447.0. "Problems with RapidPrint 500 and escape codes" by CSC32::B_YOUNGWIRTH () Mon Feb 24 1997 14:07

    I have searched the entire notesfile for anything pertaining to the 
    RapidPrint 500 and have not found a thing, so am requesting help here. 
    
    When printing to an LA400 and sending escape sequences, the sequences
    are not being interpreted.  Instead, when sending the following
    sequence 
    <ESC>[4w
    or
    <DCS>4w
    the 4w prints, but that's it.
    
    The customer is printing from an Alpha running OpenVMs 6.2-1H3
    using LAT.  We have been testing by printing from the LAT que
    and also copying directly to the LTA device.  In either case, we have
    not been able to get this to work correctly.  He is printing to an
    LA400 connected to the parallel port on the RapidPrint.  We tried 
    setting the LTA device to PASTHRU, but that did not resolve the
    problem.
    
    The RapidPrint is V3.4/5 (961028), and he is printing to Port_1.  If
    anyone has seen a problem similar to this, please let me know.
    
    Thanks
    Barbara Youngwirth
    Customer Support Center/Colorado
T.RTitleUserPersonal
Name		DateLines
3447.1Changing protocol to ANSI resolved problemCSC32::B_YOUNGWIRTHThu Feb 27 1997 13:147
    Just in case someone else has the same question.  When selecting the
    parallel port on the LA600, the default is not ANSI (from what the
    customer says, I do not have one here to test with).  By changing the
    protocol to ANSI, it works fine. 
    
    Barb Y.