| Title: | Ask the Storage Architecture Group |
| Notice: | Check out our web page at http://www-starch.shr.dec.com |
| Moderator: | SSAG::TERZA N |
| Created: | Wed Oct 15 1986 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6756 |
| Total number of notes: | 25276 |
RE: SCSI PASSIVE HUB (For Lack of a better word)
I have ie 6 HSJ52 each with one port reserved for tape units
I want to feed these 6 ports to DWZZA's and then to DWZZ*'s which then
go to a TL896/TZ887's(DWZZA's in the last case.
My big question
As I do not want six DWZZA-AA's on each end:
Is there a product that would be similar to a BA356 in split mode that
I can put 6(or part thereof) DWZZA-VA/DWZZB-VW's into a backplane that
has 3 BA35X-MG/MH ???
Ok maybe 4?
how do I submit a request like this to Computer Special Systems (CSS)?
Is there perhaps a connector that will connect to the rear of a
DWZZA/B-VA/VW? that has a power lead and a 50pin HD honda connector on
the other for connection to a BN21H?
Regards Ivan
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 6689.1 | DECWET::ONO | Software doesn't break-it comes broken | Thu May 15 1997 09:40 | 4 | |
You shouldn't need the DWZZA at the TL896 end. TL896 has a FWD SCSI interface. Wes | |||||
| 6689.2 | KZPSA? | BIGCHZ::EZZELL | Mike Ezzell | Thu May 15 1997 09:50 | 3 |
Have you considered connecting the TL896 directly to KZPSA? | |||||
| 6689.3 | No PCI | JOBURG::HARRIS | Thu May 15 1997 11:21 | 15 | |
Hi,
I got 8 AS8400 with XMI's (VMSv6.2 due to application) and 4 CIXCD's in
each system (Max Two CIPCA's on system)
We do not have any PCI buses.
Currently we have 5 (will be 10 when 3rd shadow member comes online)
HSJ52's with 6 TZ88n-VA/TZ887's
Just a little clarity
Cheers
Ivan
| |||||