| T.R | Title | User | Personal Name
 | Date | Lines | 
|---|
| 7413.1 |  | PCBUOA::KRATZ |  | Mon Apr 14 1997 12:04 | 3 | 
|  |     The video driver version sounds a bit flakey... it should be
    something like V2.20 or V2.35 (V2.35 currently being FIS'ed).
    K
 | 
| 7413.2 |  | BSS::PROCTOR_R | PC....Politically Corrupt | Mon Apr 14 1997 13:40 | 2 | 
|  |     you might want to ask this in the NT notes file as well, someone might
    have run across it.
 | 
| 7413.3 | Lack of RAM? | SNOFS1::16.153.96.192::powellronald | Australia! | Mon Apr 14 1997 20:19 | 4 | 
|  | Sounds like lack of memory if the driver rev is ok. How much ram 
has the video card got?
Ron.
 | 
| 7413.4 | a few questions | HOTAIR::SLOMSKI |  | Tue Apr 15 1997 16:20 | 8 | 
|  |     questions:
    
    1) does the same problem occur at 1280*1024*256 colors?
    2) does the same problem occur at truse color but 60hz refresh rate?
    
    
    
    Mike Slsomski
 | 
| 7413.5 | More info | ITPD01::LOTTO |  | Thu Apr 17 1997 03:52 | 13 | 
|  |     Thanks for your interest.
    
    The video driver version i reported was what i seen in NT diagnostic,
    driver was updated by the customer from Matrox internet site and the
    problem remain the same.
    
    The video card has 8MB memory.
    
    Problem the same, but minus evident, with lower resolutions.
    
    Errata corrige: i said blanks instead of white defining vertical
    raster: excuse me.
    
 | 
| 7413.6 | Matrox video option ram problem | PCBUOA::PENG |  | Thu May 08 1997 09:47 | 10 | 
|  |     I have created a techtip for video white line noise problem for
    Celebris GL 5xxx system with 6MB video option ram installed. The techtip
    can be found on our web site,http://pcbu.ako.dec.com 
    If this didn't address your problem then,you might want to log an IPMT to
    support engineer.
    
    regards,                                 
    Judy
    
     
 |