[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 7.286::postscript_printing

Title:	Digital PostScript printers and their associated software

Moderator:	REGENT::LASKOHER

Created:	Wed Jan 24 1990
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	7230
Total number of notes:	31971

7226.0. "LPS17 memory type and location?" by FX28PM::SMITHP (Written but not read) Wed Jun 04 1997 13:30

    We just got our hands on a hand-me-down LPS17 with 16MB of memory. We have 
    access to a handful of simms but don't know what kind the LPS17 uses or 
    where/how to install them. The only manual still around is the users 
    guide which has no information about hw configs etc...
                                                   
    Help!

T.R Title User Personal
Name Date Lines

7226.1 Its all done with mirrors 18649::CSCMA::KOECK Fri Jun 06 1997 09:04 9

T.R	Title	User	Personal Name	Date	Lines
7226.1	Its all done with mirrors	18649::CSCMA::KOECK		`Fri Jun 06 1997 09:04`	9
	The lps 17 comes in two flavors. 300 dpi and 600 dpi. The 300 dpi requires memory with parity, the 600 doesn't care. There is a logo to the lower right of the cassetts that tells if it is a 600. There is a power switch and LED in the same place if it is a 300. The memory sims can be either 4 or 8 meg, but must be at least 60 n sec. if you are mixing 4 & 8 meg simms, install the higher capacity simm in the lower numbered socket. Tom

    The lps 17 comes in two flavors.  300 dpi and 600 dpi.  The 300 dpi
    requires memory with parity, the 600 doesn't care.  There is a logo
    to the lower right of the cassetts that tells if it is a 600.  There is
    a power switch and LED in the same place if it is a 300.  The memory
    sims can be either 4 or 8 meg, but must be at least 60 n sec.  if you 
    are mixing 4 & 8 meg simms, install the higher capacity simm in the
    lower numbered socket.
    	
    Tom