| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3633.1 | | MARVIN::HIGGINSON | Peter Higginson DTN 830 6293, Reading UK | Tue May 13 1997 14:30 | 6 |
|
>is it supported an MPC-III with decnis version 3.1-11?
Officially no (ie it's not in the SPD), unofficially yes.
Peter
|
| 3633.2 | MPC-III download failed | TPOMC1::DOUGLASDAN | | Tue May 20 1997 23:23 | 9 |
| Hi guestion for the version also
How about version 3.1-7b with MPC-III (DNSBN-BH) ?
I installed two nis600 with DNSBN-BH and try to down load the v3.1-7b
software, All got the flash memory write error, and nis600 crash. It's the
version problem ? or it's flash memory problem ?
|
| 3633.3 | at least V3.1-11 needed for MPC-III | MARVIN::HIGGINSON | Peter Higginson DTN 830 6293, Reading UK | Wed May 21 1997 03:43 | 5 |
|
No. Nothing before 3.1-11, officially nothing before 4.0
Peter
|
| 3633.4 | Another case | HTKING::M_SHELDON | | Wed May 21 1997 08:31 | 21 |
| >No. Nothing before 3.1-11, officially nothing before 4.0
Part of the confusion comes from the DECnis MPC-III and V4.0 Sales Update
Article in note 3422.0. It says the MPC-III will run with V3.1. Just last
week I also had a customer discover by accident that they needed to go to
V4.0 with their MPC-III to work.
The MPC-III was suspect so they obtained a replacement which didn't
light up at all. The second replacement also didn't work until they
reseated some daughter cards in the lower-left hand corner. Ended
up being a 5-day outage while they waited for replacements, received
bad ones, and figured how to get them to work. Customer was CMG in the
U.S.
Mike Sheldon
CSC/CS Network Support
|