| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3409.1 | Mis-calculated counters? | MSDOA::REED | John Reed @CBO = Network Services | Fri Oct 11 1996 00:06 | 11 |
| 3409.2 | discard - bad dlci possibly | MARVIN::RIGBY | No such thing as an alpha beta | Mon Oct 14 1996 05:42 | 40 |
| 3409.3 | CRC errors | CSC32::CULP | | Mon Oct 14 1996 09:20 | 3 |
| 3409.4 | The single HDLC CRC applies to the whole frame | MARVIN::RIGBY | No such thing as an alpha beta | Wed Oct 16 1996 04:44 | 6 |
| 3409.5 | Routing Circuit Counters for Frame Relay | HTKING::M_SHELDON | | Tue May 06 1997 12:49 | 104 |
| On a related issue, some of the routing circuit counters for a PPP Frame Relay
circuit do not increment. Any idea if this will ever be fixed. I will do an
IPMT if it would help.
V4.0.2B Mike Sheldon
CSC/CS Network Support
sho node nisco1 routing circuit nisco1-nis085-fr all attr
!
! Node nisco1 Routing Circuit NISCO1-NIS085-FR
! at 1997-05-06-10:27:57.579-04:00Iinf
!
! command failed due to:
! get list error
!
! Identifiers
!
! Name = NISCO1-NIS085-FR
!
! Status
!
! Lower Layer Ports =
! {
! PPP Port port$3 ,
! PPP Port port$4 ,
! PPP Port port$5
! }
! Negotiated Neighbor IP Address = 10.203.32.1
! Negotiated Local IP Address = 10.200.208.1
! IP Data Link SDU Size = 1500
! UID = 3DA96148-BD1C-11D0-8000-08002BA6CB80
! State = On
! Data Link SDU Size = 1492
! Point To Point ID = '08002BA6CB8002'H
! Data Link Port = PPP Port port$5
!
! Characteristics
!
! Type = PPP! Template
= ""
! Neighbor IP Address = 10.203.32.1
! Data Link Entity = PPP Link NISCO1-NIS085-FR
! Phase IV Routing Vector Timer = 30
! Network Protocols =
! {
! IP ,
! DECnet Phase IV ,
! ISO8473
! }
! Manual IP Data Link SDU Size = 1500
! Hello Timer = 10
! L1 Cost = 3
! Originating Queue Limit = 32
! L1 Router Priority = 64
! Manual Data Link SDU Size = 1492
! DNA Neighbor = True
! Explicit Receive Verification = True
! Recall Timer = 60
! Subnet Address =
! [
! Address = 0.0.0.0 ,
! Mask = 0.0.0.0
! ]
! Alternative Subnet Addresses =
! {
! }
! All Subnets Broadcast = Off
! BOOTP Relay = 0.0.0.0
! BOOTP Servers =
! {
! }
! IP Broadcast = 1
! Initialization Delay = 0
! Segmented RV Block Size = 5
! write only attribute: Transmit Verifier = <Default value>
! write only attribute: Receive Verifier = <Default value>
!
! Counters
!
! Data PDUs Received = 0 ! *** I think these
! Data PDUs Forwarded = 0 ! *** should increment
! Data PDUs Fragmented = 0 ! ***
! Data PDUs Transmitted = 0 ! ***
! Congestion Discards = 0
! Segmentation Failure Discards = 0
! Circuit Changes = 1
! Changes in Adjacency State = 15
! Initialization Failures = 0
! Verification Rejects = 0
! Rejected Adjacencies = 0
! Corrupted LSPs Received = 0
! Control PDUs Sent = 285334
! Control PDUs Received = 185826
! ID Reachability Changes = 0
! Creation Time = 1997-04-24-23:30:18.499-04:00Iinf
! IP Received Discards = 0
! IP Send Discards = 0
! IP Fragmentation Failure Discards = 1
! IP Packets Forwarded = 0 ! ***
! IP Packets Received = 0 ! ***
! IP Packets Fragmented = 0
! IP Fragments Created = 0
! Rejected IP Adjacencies = 0
|
| 3409.6 | per-connection counters available in V4.0-5 | MARVIN::RIGBY | No such thing as an alpha beta | Wed May 07 1997 04:19 | 15 |
| This is documented behaviour for DECNIS software versions before V4.0-5. As the
line card did not keep per-connection counters for the frame relay channel the
routing circuit (which is associated with a single connection) counters couldn't
be maintained either.
With the very latest DECNIS V4.0 release which hasn't even been announced yet
there are a lot of Frame Relay enhancements including the maintenance of
per-connection counters, connection rate control, BECN monitoring etc. etc.
I would recommend all users of Frame Relay to use the V4.0-5 version of the
DECNIS software and check out the internal DECNIS web pages including
http://www-engreo.reo.dec.com/cbnbus/html/decnis/framerelay.html
John
|
| 3409.7 | Per PVC Frame Relay Counters as of V4.0-6 | MARVIN::MCCLURE | Tony McClure, DECnis Engineering RE02 FD9 7830-3564 | Wed May 07 1997 04:22 | 17 |
| Hi Mike,
As you mentioned in a previous reply frame relay per PVC counters
don't work. This was a due on a limitation in the linecard software.
As of V4.0-6 (soon to be released to the world) the DECnis frame relay
support has been greatly enhanced. The DECnis now supports frame-relay
rate limiting to a fixed CIR and also dymanic increasing above CIR
when the frame relay network is quiet. Also we have implemented per
PVC counters.
I believe that the documentation if available from DECnis web page.
Cheers Tony.
|
| 3409.8 | no it really is V4.0-5 | MARVIN::RIGBY | No such thing as an alpha beta | Wed May 07 1997 04:25 | 27 |
| Notes collision and Tony quoted the wrong version - we had proposed skipping a
version for this release but we didn't so its called V4.0-5 not V4.0-6.
<<< Note 3409.7 by MARVIN::MCCLURE "Tony McClure, DECnis Engineering RE02 FD9 7830-3564" >>>
-< Per PVC Frame Relay Counters as of V4.0-6 >-
Hi Mike,
As you mentioned in a previous reply frame relay per PVC counters
don't work. This was a due on a limitation in the linecard software.
As of V4.0-6 (soon to be released to the world) the DECnis frame relay
support has been greatly enhanced. The DECnis now supports frame-relay
rate limiting to a fixed CIR and also dymanic increasing above CIR
when the frame relay network is quiet. Also we have implemented per
PVC counters.
I believe that the documentation if available from DECnis web page.
Cheers Tony.
|
| 3409.9 | Thanks | HTKING::M_SHELDON | | Wed May 07 1997 08:58 | 0
|