| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 573.1 | It's OK | SAC::KINDER_N | Neil Kinder TCC South (Communications) | Fri Feb 12 1993 11:35 | 13 |
| 573.2 | Sort of correct | MARVIN::DAVISON | Eric Davison | Fri Feb 12 1993 11:48 | 12 |
| 573.3 | ROM on MPC - each LAN channel addr different | MARVIN::RIGBY | VAX et praetera nihil | Mon Feb 15 1993 05:03 | 29 |
| 573.4 | | MARVIN::BAILEY | Professor Humphrey | Wed Feb 17 1993 04:12 | 4 |
| 573.5 | Configurator setting wrong mac addresses? | POLAR::HUTCH | Mike Hutchings, GPS Canada, Kanata | Thu Jan 23 1997 13:14 | 7 |
| 573.6 | Use NCL to get the full picture | MARVIN::RIGBY | No such thing as an alpha beta | Fri Jan 24 1997 15:30 | 10 |
| If you are loading from a DECnet/OSI node then the configurator will have the
the MOP client MAC address set to ALL address from base+2 to Base+f. If you are
then using the NCP emulator to look at these settings PHASEIV MOP clients only
had a single MAC address so I guess the NCP emulator is returning the first from
the set.
You don't tell the configurator over which wire on the DECNIS you will be
loading, it assumes it could be any of them.
You can't be running the configurator on a PhaseIV node.
|