[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4411.0. "DC900TH/DEChub ONE-MX Question" by CHR27::YEUNG (im2bz2p,ru?) Wed May 14 1997 13:00

My customer has a DECconcentrator 900TH connected to a DEChub ONE-MX.
MIC Mod-PMDs are installed for both the two front panel ports and
for the two DEChub ONE-MX ports.

How do you configure the 900TH ports so that he can
connect two VAX 4000-505A systems (SAS MIC ports) to the
900TH and also connect the 900TH (single attachment) to a
GIGAswitch (MIC ports)?

Is it possible (using some kind of adapter/cable) to connect
the VAX 4000-505A (SAS MIC ports) to the 900TH UTP ports?

Thanks

Tim
T.RTitleUserPersonal
Name		DateLines
4411.1Could try this ...SNOFS1::KHOOJEANNIELaziness breeds EfficiencyFri May 16 1997 03:0313
    What about configuring the DEChub ONE-MX ports as A and B and all the front
    panel ports as M.
    
    Connect the GIGAswitch (configured S) to a front panel M port and
    connect the Vaxes (S also) to the DEChub ONE-MX A and B ports.  Port A
    to S and Port B to S is a thru state.
    
    Someone else may have an improvement on this?  Or you could try in the
    FDDI notes conference.
    
    Regards
    Jeannie