[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4408.0. "DEL8X and DE500-XA" by BARNA::DSMAIL () Tue May 13 1997 11:31

    
    
    Hi,
    
    Is there any NVRAM in the DEL8X Etherworks Switch that stores the
    settings of the speed, HDX or FDX, and so on?
    
    A customer of mine is reporting that several AXP running VMS 6.21H3 having
    all of them a DE500-XA 10/100Mb Ethernet connected to a DEL8X Ethernet 
    Switch does not autodetect the speed and the transmission mode.
    
    Even though I've read in the manual that '...the DEL8x can detect
    transmission speed even if the attached device does not support
    autonegotiation...' that seems to be the case of the DE500-XA I've told
    the customer to force manually the setting in the Switch and the AXP
    via Configure Button and LANCP.
    
    After that everything works ok: 100Mb/FDX, but when the workstation is
    powered off and on, the Switch does not set up at 100Mb transmission
    rate.
    
    The the customer plays disconeccting the cable several times, not only
    one as the manual states, and after several attempts the Switch
    switches at 100Mb.
    
    Again, is there any sort of storing function of whatever that make this
    thing work?
    
    Thanks in advance
    
    Jordi Manchon
    MCS Spain
T.RTitleUserPersonal
Name		DateLines
4408.1ALPLAN04 ECO kitCSC32::J_SOBECKIJohn Sobecki, DTN 592-4101, CXO3-2/D2Tue May 13 1997 16:3815
    Hi Jordi,
    
    I'm not sure on the 900EX switch side of things, but have worked this
    problem from the OpenVMS side many times successfully.
    
    Make sure the Alpha console firmware is up-to-date, and with the
    ALPLAN04 version of SYS$EWDRIVER installed, it will actually preserve
    the EWA0_MODE setting for FastFD (100Mbit Full duplex) or Fast (100Mbit
    no full duplex) and won't flip-flop on you.
    
    The ALPLAN04_062 kit is in TIMA.  
    
    Regards,
    John Sobecki
    CSC/Colorado
4408.2Store or not store?BARNA::DSMAILWed May 14 1997 05:4633
    
    
    John,
    
    thanks for your reply.
    
    Actually the DE500-XA does work at 100/200Mb in FDX mode when the
    customer forces via configuration switch at the Switch side and via
    LANCP at Alpha side. The problem arises when the Alpha is shutting down
    and powered off, the Switch comes back to 10Mb. I've asked the customer
    to not power off the machine to see what is the behaviour.
    
    Having checked firmware rev. on the Alphas , they have , one of the
    latest revs -as hw guys said to me- , the 2100 has the 4.7-143 and
    two AlphaStation500 have 6.3-11, these has been seen via SDA> CLUE
    CONFIG looking at 'Console Vers...'
    
    Next step is send to customer the ALPLAN04...patch kit, but as I
    mentioned earlier the DE500-XA does work when forced.
    The question is why DEL8X does not store the previous value of this port
    manually configured? even the manual says on page 2-5 that '...The
    DEL8X can detect speed even if the attached device does not support
    autonegotiation...'
    
    Another interesting thing is that customer says that the Switch box
    there is NO any label indicating the model or the serial number or the
    rev., the only reference is 'Digital Etherworks Switch 8TTX' and 'Made
    in Taiwan'
    How can we know the rev. levels of hw.? Looking at the board?
    
    Thanks in advance
    
    Jordi Manchon