[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4382.0. "VNswEA and ATMworks350L" by BPSOF::KIRALY (Endre Kir�ly) Tue Apr 29 1997 06:47

Hi,

Our customer has a VNswitchEA (in a MS900 hub), and an Intel NT 4.0 server with 
an ATMworks 350L in it. We use the latest ORCA 3.0 (Efficient) software for the 
ATMworks350L, the ATM card is connected to the VNswEA directly with UTP cable, 
and there is a PC connected to one of the Ethernet port of the VNswitch:

                            -----------------             ---------
                           |   Ethernet port-|-----------|    PC   |
 ----------                |                 |           | Netbeui |
| NT4.0 Srv|               |      VNswEA     |           | (TCPIP) |
| ORCA 3.0 |  Br. Tunnel   |                 |            ---------
| ATMw350L------------------- Interface 13   |
| Netbeui  |    VCI=100    |                 |
 ----------                 -----------------
                           

 - Both of the ATM leds on ATMworks350L and VNswitchEA light, so the physical 
   connection seemes to be correct
 - We defined Bridge Tunnel (rfc 1483) on both side
 - VCI numbers are defined correctly on both side (=100)
 - The state of bridge tunnel is UP on VNswEA
 - The state of Interface 13 is UP on VNswEA
 - VNswEA-PC connection is correct, ie. ping from the PC to the VNswEA works
 - we use NETBEUI both of the NT server and PC client.
 
Everething seemes to be fine but the connection between the NT server and the PC 
doesn't work.

What's wrong? Had anybody ever tried this type of ATM configuration?

Thanks,

Endre

T.R	Title	User	Personal Name	Date	Lines
4382.1		NETCAD::FLOWERS	High Performance Networking; Dan	`Tue Apr 29 1997 15:51`	9
	>Everething seemes to be fine but the connection between the NT server and >the PC doesn't work. So, ping between the VN and the PC works ok? And ping between the VN and the NT server works ok? Is it a FDDI or Eth bridge tunnel? Dan
4382.2	ping is not ok as well	BPSOF::BPSNKE.bps.DEC.COM::kiraly		`Wed Apr 30 1997 02:48`	10
	Dan 1. Ping is OK between PC and VNswEA, and is not OK between NT and VNsw. With tcp/ip the situation is the same as with Netbeui. 2. This is an Ethernet encapsulation of course, ATMworks350L does not support FDDI Endre
4382.3	maye UTP cabling problem?	BPSOF::BPSNKE.bps.DEC.COM::kiraly		`Wed Apr 30 1997 05:16`	23
	Another question: We used standard straight-through UTP cable between ATMworks350L and VNswEA, and leds were ok, so we thought the cabling was correct. But, there is a note in the ATMworks350L Installation Guide which mentions "The pinout of the ATM adapters Category 3 and 5 UTP jack is different than a standard Ethernet UTP jack". The ATM pinout on the ATMworks adapter is: 1 --- Transmit + 2 --- Transmit - ... 7 --- Receive + 8 --- Receive - Is ATM port pinout of VNswEA the same? What kind of pinout of UTP cable must be used, cross wired or straight-through? thanks, Endre
4382.4	text reformatted for 80 column viewing...	NETCAD::BATTERSBY		`Wed Apr 30 1997 09:31`	30
	<<< NETCAD::KALI$USER3:[NOTES$LIBRARY]HUB_MGNT.NOTE;1 >>> -< DEChub/HUBwatch/PROBEwatch CONFERENCE >- ================================================================================ Note 4382.3 VNswEA and ATMworks350L 3 of 3 BPSOF::BPSNKE.bps.DEC.COM::kiraly 23 lines 30-APR-1997 05:16 -< maye UTP cabling problem? >- -------------------------------------------------------------------------------- Another question: We used standard straight-through UTP cable between ATMworks350L and VNswEA, and leds were ok, so we thought the cabling was correct. But, there is a note in the ATMworks350L Installation Guide which mentions "The pinout of the ATM adapters Category 3 and 5 UTP jack is different than a standard Ethernet UTP jack". The ATM pinout on the ATMworks adapter is: 1 --- Transmit + 2 --- Transmit - ... 7 --- Receive + 8 --- Receive - Is ATM port pinout of VNswEA the same? What kind of pinout of UTP cable must be used, cross wired or straight-through? thanks, Endre
4382.5	A crossover cable might be needed...	NETCAD::BATTERSBY		`Wed Apr 30 1997 09:34`	4
	Someone correct me if I'm wrong, but you may have to use a BN25H crossover cable to connect two ATM devices to each other. Bob