[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4318.0. "MCM V6.0A missing trbl_gig.hlp file " by CSC32::J_SOBECKI (John Sobecki, DTN 592-4101, CXO3-2/D2) Thu Mar 27 1997 21:50

    Hello,
    
    Customer installed MCM V6.0A, new install on a Win95 PC.  When managing
    a GIGASwitch/FDDI, selecting Help, Troublshooting, the help file
    trbl_gig.hlp is missing.
    
    I personally upgraded from MCM V5.0, and it looks like the file was left 
    from MCM 5.0 (the date on trbl_gig.hlp is April 1, 96) if you upgraded.  
    
    Is there a new version of the trbl_gig.hlp file for MCM V6.0? 
    
    Thanks,                                               
    John Sobecki
    CSC/Colorado
T.RTitleUserPersonal
Name		DateLines
4318.1It's a BugNETCAD::DRAGONMon Mar 31 1997 10:529
    
    John,
    
    	Thanks for bringing this to our attention. I'll file a PTR.
        I thought that just obtaining the file requested would help,
        but it didn't (tried it on a V1.1A release kit here).
    
    Regards,
    Bob
4318.2Should be same as trouble.hlpNETCAD::DRAGONMon Mar 31 1997 12:199
    
    Hi John,
    
    	The fix should make it into the next version of MCM. I believe that
        if you copy the file trouble.hlp to trbl_gig.hlp, that should
        essentially give you what the fix will.
    
    Thanks again,
    Bob
4318.3thanksCSC32::J_SOBECKIJohn Sobecki, DTN 592-4101, CXO3-2/D2Tue Apr 01 1997 19:387
    Bob,
    
    Thanks for the workaround.  I'll write an article on the issue for our
    database here at the CSC.
    
    Good Day,
    John Sobecki