[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4267.0. "rear AUI port not work in 90T16" by HGOM19::MARKWU () Wed Mar 12 1997 06:56

    Dear colleagues:
    
    	I meet a strange thing in Multistack 90T-16 with AUI rear cover.
    	Total have 6 90T-16.
    
    	ALl of them have same part-no. rev.
    	Now there only have one can use AUI backbone! WHY ?
    	I changed rear cover each other, but find the problem belongs to
    	90T-16 itself.
    
    	The other's can use with thin and RJ-45 very well except AUI.
    
    	Any hints ?   Does it need SNMP to set the AUI port ?
    
    
    Thanks
    					Mark.

T.R	Title	User	Personal Name	Date	Lines
4267.1	sounds like dead hardware, does it pass Selftests	KERNEL::FREKES	Like a thief in the night	`Wed Mar 12 1997 09:44`	9
	> does it need SNMP? Probably not, the 90t-16 does not have an intergrated SNMP agent, and neither does it run any upgradable firmware. Sounds like a hardware issue. Use normal channels for hardware replacement. Steven
4267.2	stack restriction ?	JOBURG::RYAN	There'll be days like this	`Mon Mar 17 1997 04:11`	4
	is there not maybe a restriction on the number of simultaneous AUI port connectsions in a stack ? Ryan
4267.3	Need more configurationinformation	NPSS::WONKKA		`Wed Mar 19 1997 13:00`	10
	Mark, Can you give more information about this configuration? Are you connecting the management cables in multistack? Is the AUI LED on on EACH of the stack stations? Can you provide a configuration drawing with all the connections and cables being used? John Wonkka Network Product Support