[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3557.0. "HUBwatch & W95, modules setup problems" by ROM01::GALLANA (Francesco Gallana) Fri May 24 1996 11:13

    Hello,
    
    I experiencing a problem with HUBwatch 4.1.1 on WINDOWS95 while trying
    to set-up some parameter of a DECswitch 900EF (may be there is the same
    problem even on other products)
    
    The windows where I'm working on is the  "Switch configuration:..."
    
    While trying to modify the LB100 compatibility, Raw 802.3 IPX ...
    I'm not able to display the two options available (ex: Autoselect, 
    IEEE 802.1D); instead I see only the actual selection
    
    The only way to modify the selection is to use HUBwatch on Windows 3.11
    or on UNIX.
    
    I'm working on both a HiNote Ultra CT450 and on a Venturis
    
    Sould someone tell me if this problem has been solved?
    
    Many Thanks
    
    Francesco

T.R	Title	User	Personal Name	Date	Lines
3557.1	Someone has seen tha same problem??????	ROM01::GALLANA	Francesco Gallana	`Thu May 30 1996 11:54`	7
	Hello, does somebody have seen the same problem? or it should be that I'm the sole with this kind of problem ?????? Francesco
3557.2	You're not alone 8-)	LEMAN::PAIVA	Hawkeye - Network Support @GEO	`Mon Jun 03 1996 08:25`	8
	No, you're not the only one. We are using IEEE 802.1d and cannot see the Autoselect option since some version of firmware (but aren't about which one it is, 1.5.0 or 1.5.2). Cheers, Pedro
3557.3		NPSS::WADE	Network Systems Support	`Mon Jun 03 1996 09:07`	5
	I have no problem with this option running 1.5.2. What rev are you running? Bill
3557.4	Choice is there if you "drag" across the selections	NETRIX::"[email protected]"	Aaron Stout	`Mon Jun 03 1996 16:04`	6
	I've seen the problem you describe. You can see the other selection if you "drag" the mouse pointer across the field. It's difficult at first, but after you do it a few times it becomes easy. Hope this helps... Aaron [Posted by WWW Notes gateway]
3557.5	yes, it runs	ROM01::GALLANA	Francesco Gallana	`Wed Jun 05 1996 04:31`	7
	Aaron, my best compliment to you thanks a lot Francesco