Conference netcad::hub_mgnt

3497.0. "PORTswitch auto address learning ?" by VNABRW::WALDHERR () Tue Apr 30 1996 12:01

HI



            <<< NETCAD::KALI$USER3:[NOTES$LIBRARY]HUB_MGNT.NOTE;1 >>>
                   -< DEChub/HUBwatch/PROBEwatch CONFERENCE >-
================================================================================
Note 2677.0             PORTSwitch900FP and auto learning                1 reply
PRSSOS::PEYRACHE "Jean-Yves Peyrache Country Suppor" 20 lines  24-AUG-1995 13:45
--------------------------------------------------------------------------------

  hi ,

 does the PORTswitch900FP support currently the auto learning of stations
 address ? (V2.0 of Firmware and V4.0.1 of HUBwatch)
 
 my learned station window stays desesperatly empty,i must enter manually
 using the address authorizations window to populated the authorization
 stations field.

 in Repeater summary window

 does the field LAN/group in port table works correctly ?

 i have entered a name of all groups in Portswith windows all are connected
 on differents LAN in the HUB the field stay empty

  thanks in advance for any clarification

  JYP
================================================================================
Note 2677.1             PORTSwitch900FP and auto learning                 1 of 1
NETCAD::DRAGON                                       14 lines  28-AUG-1995 08:52
--------------------------------------------------------------------------------
    
    Hi,
    
    	Support for auto-address learning for the PORTswitch 900FP (V2.0.0
        FW) will be available in HUBwatch V4.1.
    
        Unfortunately the LAN/Group field on the Repeater Summary Window
        is not supported. The overhead involved made window activation
        slow. A couple of possibilities for the future are 1) having a
        new button to request this info. 2) making this info. optional
        on window activation, 3) getting the info. faster.
    
    Regards,
    Bob

--------------------------------------------------------------------------------



The "PORTswitch 900TP Release Notes" Version 2.1 says at section 
"Known Conditions and Restrictions" that 

If you have one workstation connected to a port and that workstation is 
generating traffic, and you use HUBwatch to enable address learning for the 
port, the port will not learn the station's address.

My customer use HUBwatch for Windows V4.1.1.

With which Version of HUBwatch and/or PORTswitch FW you plan to support the 
'auto address learning'? Need just a statement for my customer.

Cheers
Andreas