[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3364.0. "Standalone Hubloader Install failure Shadow GPF" by IAMOSI::DANIEL () Thu Mar 14 1996 02:41

	Hubloader Standalone installation gives the following problem in both
	Windows95 & WFW3.11. The kits (V1.1.0) were from 
	ftp.digital.com/pub/Digital/hub900/firmware/hubloader_pc

	"Shadow

	The program performed an illegal operation & will be shutdown. If the 
	problem persists, contact the program vendor.

	Shadow caused a general Protection Fault in module TMP2B36.exe at 
	0002:00000197"

	This is followed by register dump/stack dump.
	
	Is this a known problem? Is there any procedure I am missing? I could
	simulate the cust problem on my windows95.

	Thanks in advance.

	Daniel.

	CSC, Sydney.

T.R	Title	User	Personal Name	Date	Lines