| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
DECswitch900CP Port switching matrix "V" sometimes gone
after clicking a port on f.i group 2 it is not possible to click it
back on group 1. It looks like it happens in an Hub without a Bridge
in it. The sw version is V2.1.0
what to do ? ad
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3210.1 | might wanna try this.... | NETCAD::GORDON | Wed Jan 31 1996 12:27 | 11 | |
Some Help ???
We've (system test) have found this recently. Here's a quick thing to
try. On the ports that were moved to another group, you now want to
put them back on the top group. Ie: group with MAC ?
Try putting a repeater terminator on the port your trying to move back
and that should let you move the checkmark back up to the top group.
BTW: Are your checkmarks vanishing when you try to get back to group 1??
Tim
| |||||
| 3210.2 | additional info to .1 | UTRTSC::UTRTSC::DEKKER | Thu Feb 01 1996 11:31 | 17 | |
As a follow-up on .0:
In-house we did put a terminator on the port as you suggested and that
works!! However: on the customer site there was a terminated piece of
cable including two stations connected to that same port; which makes
the whole thing a bit suspicious.
btw. Yes the checkmarks are gone and only be regained by resetting the
whole repeatermodule. From what we see is that the 'unterminated' port
comes into a 'management disabled' state and possibly due the
autopartition mechanisme never is able to return to the 'normal' state.
So if live-ports can not be switched then the switch gets more or less
unusable for some customer situations.
Will this be solved? And if so when can we/customer expect the release?
Ton.
| |||||