[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2837.0. "Mgmt Bus pin-out" by SNOFS1::KHOOJEANNIE (Humpty Dumpty was pushed) Fri Oct 06 1995 01:56

    A customer of ours is going to run the MultiStack management cable
    around parts of his building.
    
    Does anyone know what the pin-out is for the management bus?
    
                                           
    Regards
    Jeannie
T.RTitleUserPersonal
Name		DateLines
2837.1SimpleNETCAD::HERTZBERGHistory: Love it or Leave it!Fri Oct 06 1995 12:253
    Just use straight through 10Base-T cables, such as BN25G or BN26M.
    
    							Marc
2837.2But do we need all 8 wires?SNOFS1::KHOOJEANNIEHumpty Dumpty was pushedMon Oct 16 1995 21:047
    The reason why I want to know the exact pin-out is that we have a
    customer who is going to run the MultiStack management bus up a riser,
    piggybacking on the existing telephone cabling, and wants to minimise
    the number of pairs needed.
    
    Thanks
    Jeannie
2837.3Four wires will doNETCAD::HERTZBERGHistory: Love it or Leave it!Tue Oct 17 1995 09:182
    No, you don't need all eight wires.  We only use the same two twisted
    pairs as 10Base-T cabling.