| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Please explain how backplanes are upgraded? (I can explain the hardware migration but can you help me with the Firmware with a discription of" Hubloader)"and how firmware releases are upgraded? I am researching an RFP that is due in a couple of days, and I need some good verbage on the hub mam firmware upgrade process. I'm looking through my training materials, but so far I don't have anything. Thanks, Ron
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2427.1 | Some info | NETCAD::FORINO | Mon Jun 26 1995 09:08 | 22 | |
There is no hardcopy manuals associated with the HUBloader. All
the information associated with the HUBloader is in the online help.
I would suggest looking at that for more information. All together
we are talking about eight pages of documentation here.
I quick explanation of how it works is as follows. Along with
HUBloader you install the DEChub Firmware Consolidated kit. This
contains all the firmware upgrade files along with an information file
- dcffiles.dat - that HUBloader uses. HUBloader uses TFTP to load
modules. The only modules HUBloader cannot load are those that
require MOP loads - the DECbridge 90 and DECagent V1.1 or earlier.
To load a module all you need is the IP address or agent name of the
module, the community string, the file name and the IP address of
node containing the TFTP Server (usually the node you are running the
HUBloader on). You can also create a load file that contains all this
information for multiple modules which can then all be sequentially
loaded.
Please check the online help for more detail.
John
| |||||
| 2427.2 | How about the HUB MAM? | SOUPER::COOPER | Ron Cooper | Mon Jun 26 1995 09:31 | 1 |
What I need for the rfp is how the process works in the hub itself. Thanks. | |||||
| 2427.3 | Same process | NETCAD::FORINO | Mon Jun 26 1995 12:26 | 3 | |
The process works the same whether upgrading hub modules or the hub
itself.
John
| |||||
| 2427.4 | But what happens in the modules? | MXOC00::CSILVA | Wed Jun 28 1995 15:12 | 8 | |
I remember looking at the 90FS manual for a detailed description for
the upgrade process. As John said, the same is for the MAM.
I think that you could find similar material in the manuals of other
modules.
Carlos
| |||||