[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2303.0. "DECbrouter90 to pass 802.2/IPX packets? How?" by ROMEOS::HARRIS_MA (Sales Executive II) Mon May 22 1995 18:00

    I have a customer, Lockheed, that is trying to run two buildings across
    a leased-line with DECbrouter90's attached. Everything seems to work
    except their NOVELL 802.2 packets. They run Novell exclusively in 802.2
    mode rather tha 802.3 as most people do.
    
    What setting do they need to change to allow IPX/SPX/802.2 to pass
    through the DECbrouter90s? It must be something because no dice yet...
    
    Suggestions?
    
    Mark
T.RTitleUserPersonal
Name		DateLines
2303.1referenceKEIKI::WHITEMIN(2�,FWIW)Tue May 23 1995 02:0618
    
    	See KALI::DEWBR Topic 643.4 and then rest of 643 as it may only
    apply to 10.0 and above.
    
    						Bill
    
    Bottom line -
    You cannot use IPX routing and IPX 802.2 with BRUT-I's 9.14 and below.
    
    	You may or may not have success bridgeing IPX 802.2 as we only
    tried it with bridging over frame-relay and never got it to work
    correctly, i.e. anytime UNICODE was down loaded the server went 100%
    conpute bound and the client hung, when we switched to ETHERNET-II
    on the Novell Server, everything worked even when we finally switched
    to IPX routing.
    
    						FWIW,
    						Bill