[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2199.0. "90T <--> 90T via UTP x-over?" by WOTVAX::64021::Tim_Banks (Network Mercenary) Tue Apr 18 1995 12:31

Can I just sanity check this config?

Is it a valid config, if you connect two DECrepeater 90T's
together via two UTP ports using a cross-over cable?

A customer is doing this but is seeing a high
collision rate.

Thanks

Tim

T.R	Title	User	Personal Name	Date	Lines
2199.1	OK, but watch the repeater hops	NETCAD::HERTZBERG	History: Love it or Leave it!	`Tue Apr 18 1995 13:55`	3
	It is a valid configuration, yes. But watch out for the total repeater count in the network. This configuration already has two repeater hops between the ports of 90T #1 and the ports of 90T #2.