[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2136.0. "Gigaswitch always displaying port 1" by OPCO::NET_JPM () Fri Mar 24 1995 00:58


I am using Hubwatch for VMS version V3.1.3 to display a GIGAswitch. When I click
on a port it always appears to display port 1 rather than the one I clicked on.
The top banner of the screen says port 1, the reject reason appears to be port
1. In the identification section it always says port 1 ID but the station number
does change.

Have I missed something  with the definition of Station/port although I would
have thought that the status information should have reflected the station?

Thanks for any help,

John Murphy

T.R	Title	User	Personal Name	Date	Lines
2136.1	V3.1 is confusing	NETCAD::FORINO		`Tue Mar 28 1995 09:32`	4
	No - you are not missing something. Unfortunately, the way V3.1 handles this is very confusing. This problem has been fixed for V4.0 so, hopefully, it will be clearer. John