[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2102.0. "db90 factory reset?" by KERNEL::SMITHP () Tue Mar 14 1995 12:31

    Is it possible to "factory reset" a decbridge90? I have a bridge that
    has a number of protocol filters set, must I redefine them all
    individually or is there a sneaky undocumented blanket reset for all
    parameters. Cant find anything in the manual.
    
    Thanks in antcipation
    
    Paul Smith.

T.R	Title	User	Personal Name	Date	Lines
2102.1	Not via MOP console	ROGER::GAUDET	Because the Earth is 2/3 water	`Tue Mar 14 1995 12:56`	7
	I don't believe there is such a thing from the DECbridge> prompt. I think you are stuck with resetting each protocol (DEFINE/SET PROTOCOL nnn NONE). Now when managing a DECbridge with a DECagent 90 through HUBwatch it's a piece of cake. The DECagent 90 can tell the bridge to reset to factory settings with an RBMS request. ...Roger...
2102.2	agent on hub900?	KERNEL::SMITHP		`Tue Mar 14 1995 14:57`	5
	Roger, thanks for the quick reply. Is the decagent required on a hub900 for the hubwatch management? Paul.
2102.3		SLINK::HOOD	This is my new personal name for Notes	`Tue Mar 14 1995 15:11`	2
	A DECagent 90 is required on the same Ethernet LAN as the DECbridge 90. It doesn't have to be in the same hub.