[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2077.0. "ManageWORKS Install Problem" by DPDMAI::DAVIES (Mark, SCA Area Network Consultant) Tue Mar 07 1995 15:47

    If this is not the correct Notes conference for ManageWORKS, please
    give me a pointer and I will move my question.
    
    I installed ManageWorks on my DECpc 433 running PATHWORKS V5.1 and
    everything went well except I get the following error messages when
    invoking ManageWORKS:
    
    	Unable to communicate with Event Dispatcher.
    
    	Event Dispatcher unable to setup its TCP port.
    
    I made all the requested changes to PROTOCOL.INI and PWTCP.INI.
    
    I installed the Demo kit from CD.
    
    IP Auto Discovery and Map Generation worked just fine.
    
    Any ideas as to what the Event Dispatcher problem might be?
    
    Thanks,
    
    Mark
    
    PS		This is a GREAT little SNMP manager to complement HUBwatch
    		and PROBEwatch.
T.RTitleUserPersonal
Name		DateLines
2077.1?installed SNMP ManagementNETCAD::WAGNERCOFFILTue Mar 07 1995 18:3015
	The correct notes file for ManageWORKS issues is 
	NOTED::PWDOSWINV5.

	Through the Management Module Setup icon in the ManageWORKS
	group, did you install SNMP Management?? This uses the
	Domain Name Resolver(DNR.EXE).

	Make sure that you copied the 3 files from the ManageWORKS
	kit. WINSOCK.DLL and DNR.EXE goes in the PW IP stack
	directory, C:\PW. DECPW.386 goes in C:\WINDOWS\SYSTEM
	directory. Make sure that DECPW.386 DOES NOT EXIST 
	in the \WINDOWS directory!

Barb
2077.2Make sure DNR.EXE is loaded.NETCAD::WAGNERCOFFILTue Mar 07 1995 19:1811
	Also, make sure DNR.EXE is loaded in your PATHWORKS Template
	file (CFGnnnn.TPL). Loading of DNR.EXE is not included as
	the default for the TCPIP template, you must specifically
	select DNR.EXE to be added to your template. If DNR.EXE is
	not in your template, add it through PATHWORKS Configure
	(PWSETUP) utility. When you select TCPIP, select Details,
	and X the DNR.EXE box.

Barb
2077.3Moved & whats nextDPDMAI::DAVIESMark, SCA Area Network ConsultantWed Mar 08 1995 08:1311
    Thanks. I will move this note to NOTED::PWDOSWINV5.
    
    For those in NOTED::PWDOSWINV5, I have checked all the items mentioned
    in .1 and .2 and everything looks good.
    
    Any other ideas?
    
    Thanks,
    
    Mark
2077.4Please post results... thanksNETCAD::WAGNERCOFFILWed Mar 08 1995 09:458
    Mark,

	Please post the results from the PW notes files for others.

	Thanks,
	Barb
2077.5ManageWORKS reply; use NOTED::MWDEV.NOTENETCAD::WAGNERCOFFILWed Mar 08 1995 09:5116
From NOTED::PWDOSWINV5 notes file...
    
================================================================================
Note 4680.1           ManageWORKS Event Dispatcher Problem                1 of 1
MWORKS::Rokicki "ManageWORKS slave"                   9 lines   8-MAR-1995 09:41
                        -< another conf, but some help >-
--------------------------------------------------------------------------------

please use NOTED::MWDEV.NOTE for ManageWORKS Workgroup Administrator
problems.

But, to give you some help here, do you have an entry for
your local machine in the hosts file?  The event dispatcher 
needs that.

- John