[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2010.0. "management for Gigaswitch/FDDI" by TAVIS::ALTER () Tue Feb 14 1995 07:30

    I understood that HUBwatch 3.1 for windows does not support
    Gigaswitch/FDDI.
    
    Does the V3.1 for OSF/1 supports Gigaswitch/FDDI (without POLYCENTER
    netview)?
    Does the V3.1 for OpenVMS supports Gigaswitch/FDDI?
    
    Is there any graphical application for NetView (not POLYCENTER
    netview) to support Gigaswitch/FDDI?
                                                   
    Ilan Alter
T.RTitleUserPersonal
Name		DateLines
2010.1OSF/VMS - yes, Windows - noNETCAD::FORINOTue Feb 14 1995 08:455
    HUBwatch V3.1 on OSF and VMS do support Gigaswitch/FDDI.  HUBwatch for
    WIndows support won't be available until V4.0.
    
    							John
2010.2OPTV17::HAYAKAWAThu Feb 16 1995 00:467
    Can HUBwatch V3.1 on OSF/1 and VMS SETUP GIGAswitch ?
    Or HUBwatch can do only status monitoring of GIGAswitch ?
    For example, Filtering, port grouping, rate-limitation, etc...

    Regards,
    Kohei
2010.3HUBwatch can configure GIGAswitchNETCAD::FORINOThu Feb 16 1995 10:016
    You'll need the console port on the GIGAswitch to set up some basic
    information - like the IP address.  Once that is done HUBwatch can
    be used to configure and manage the GIGAswitch.  HUBwatch will do
    alot more that just monitoring the GIGAswitch.
    
    							John
2010.4NPSS::WADENetwork Systems SupportFri Feb 17 1995 09:2210
    But there are limitations to managing the GS from HUBwatch.  For example 
    there is no -
    
            - rate limiting
            - ability to dump fwd db to a file
            - M-port support
            - AGL support
    
    And no plans to add this for HUBwatch V4.
2010.5OSAV20::HAYAKAWAKohei Hayakawa,DS/EIC/NIS/NT/SE, HUB5FWed Feb 22 1995 02:233
	Thank you for your information.

	Kohei.
2010.6AGL support Info PleaseGIDDAY::KULHALLIThu Feb 23 1995 17:209
    
     My customer wants to know - whether AGL support on Hubwatch/OSF
     will ever be supported? what are the current plans in that
     direction ?
    
     Thanks 
    
     Mohan Kulhalli
     CSC sydney
2010.7NPSS::WADENetwork Systems SupportThu Feb 23 1995 19:2312
    re .4
    
    The ability to dump fwd db to a file will be in of HUBwatch for OSF/1
    V4.
    
    re .6
    
    I think you'll have to ask the product manager, Jack Forrest, about the
    others including AGL suport.
    
    Bill
2010.8Why not in HUBwatch?PTOJJD::DANZAKPittsburgher �Sun Feb 26 1995 15:059
    er, I'm not sure about AGL (???) but M port and rate limiting???? Just
    how should a customer set this stuff if HUBwatch won't do it and they
    have no other SNMP manager....?
    
    Prayer?
    Sacrificing animals?
    duuh....
    j
2010.9AMCFAC::RABAHYdtn 471-5160, outside 1-810-347-5160Mon Jan 15 1996 16:173
re .8:

A fair query (if fancifully phrased) and deserving of a reply.
2010.10NETCAD::DRAGONMon Jan 15 1996 17:198
    Silence not intentional. Sometimes you just miss a reply. Thanks for
    bringing this back to our attention.
    
    M-port enable will be in HUBwatch V5.0. No plans yet for Rate Limiting
    but we will add it to the wish list.
    
    Bob