[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2005.0. "Is DECrep 90TS snap-on cover w/AUI available?" by OSL09::OYVINDC (�yvind Christoffersen) Mon Feb 13 1995 03:36

Hello,

The part no H0342-BA for the snap-on cover w/AUI is on maintenance in
my PACS and the new networking catalogue says nothing about AUI in the 
DECrepeater Comparison Chart.

If the AUI-cover is available, is it shipping with the stand-alone version
of the repeater?

Thank you in advance.

Regards,
Oyvind.
T.RTitleUserPersonal
Name		DateLines
2005.1Every 90TS has AUI option in standalone config.NETCAD::HERTZBERGHistory: Love it or Leave it!Mon Feb 13 1995 09:4613
    Every standalone DECrepeater 90TS ships with the AUI rear cover.  
    
    I know I mention the following every time the 90TS AUI is mentioned, 
    but I'm going to do it again.   ;^)   Here goes:
    
    	The DR90TS AUI uses the same internal port as the thinwire 
    	(the one which attaches to the hub 90/900 backplane thinwire
        in a hub configuration... or attaches via the side BNC in a
    	standalone configuration).  Only one or the other of the AUI 
    	and Thinwire can be active at a given time... not both.
    
    							Marc
2005.2STRWRS::KOCH_PIt never hurts to ask...Wed Feb 22 1995 19:065
    
    What is the part number to order the special rear cover for the
    DECrepeater 90TS with the AUI port?
    
    I mistakenly order an -MA version and now want to make it standalone.