[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1684.0. "How to get the DECagent 90/DEChub 90 to recognize the RoamAbout AP?" by TENNIS::KAM (Kam USDS (714)261-4133 (DTN 535) IVO) Fri Nov 11 1994 13:38

In a DEChub 90?

How can I get the DEChub 90 to recognize the RoamAbout Access Bridge?
I managing the DEChub 90 via a DECagent 90 and the Asynchronous Serial
Port.  When I attempt to ADD Module it doesn't have anything for the
RoamAbout Access Point.

Do I need to upgrade the firmware in the DECagent 90?

	
	Regards,

	 kam
T.RTitleUserPersonal
Name		DateLines
1684.1Upgrade that agentROGER::GAUDETBecause the Earth is 2/3 waterFri Nov 11 1994 15:306
Kam...

   Sounds like you have fairly old firmware (V1.1 maybe?).  The latest code
(V2.1.3) will automagically pick up the RoamAbout Access Point.

...Roger...
1684.2Same Problem in DEChub 900CTSNRG::MONSIEGNEURAlex Monsiegneur 320-5390Sat Nov 12 1994 07:286
    I am having the same problem with a DEChub900.  The latest firmware is
    installed on the HUBmanager and the Roamabout bridge still comes up as
    an unknow module.  Any clues?
    
    Thanks,
    Alex
1684.3Unkown where???PADNOM::PEYRACHEJean-Yves Peyrache Country Support Group FranceMon Nov 14 1994 06:456
 >>> the Roamabout bridge still comes up as an unknow module.

    From HUBwatch or from the Hubmanager (LCD display)

  Jean-Yves
1684.4HUBwatch V3.0 minimum required for RoamAboutSLINK::HOODI'd rather be at the PenobscotMon Nov 14 1994 09:544
For HUBwatch, you need at least version V3.0 to manage the RoamAbout.

Tom Hood
HUBwatch
1684.5Still Does Not WorkCTSNRG::MONSIEGNEURAlex Monsiegneur 320-5390Mon Nov 14 1994 11:576
    .3 From both the HUB manager and Hubwatch
    
    .4 Running Hubwatch version 3.1
    
    Thanks,
    Alex
1684.6May be a Bridge problem ...PADNOM::PEYRACHEJean-Yves Peyrache Country Support Group FranceTue Nov 15 1994 03:258
 Are you really in V3.1 of MAM ??

 What's led status on front panel of Raomabout bridge ??

 put a console on console's port of bridge , and see if you have something in 

 jean-yves