[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1642.0. "Hubwatch launch within OpenView" by SNOC02::CALEYJASON (The truth although interesting, is irrelevant.) Tue Nov 01 1994 00:37

    Hi,
    
    I have a copy of HP Openview for Windows X7.2 and SSB version of
    Hubwatch v3.1.
    
    I have setup OV with a Dechub 900 icon and entered an IP address and
    left the community at the defaults (public) as is the hub community
    setting.
    When using Hubwatch in standalone I have no problems, however when I
    attempt to launch to the device within OV, the Hubwatch program
    executes and after a brief pause and a blank screen, tells me there if
    no reponse from the agent and times-out.
    
    I believe this has something to do with OV not passing all of the
    required parameters onto Hubwatch. Has someone got this working, or
    this there a document anywhere which will give me assistance??
    
    Thanks & Regards,
    
    Jason Caley,
    Network Products Business Unit.
T.RTitleUserPersonal
Name		DateLines
1642.1Increase UDPMaxSock in PWTCP.ININETCAD::WAGNERCOFFILThu Nov 03 1994 10:046
	If you are using the IP stack from HUBwatch, edit the PWTCP.INI 
	file in the \HUBWATCH\IPSTACK directory and try increasing the 
	UDPMaxSock value in the [TCPIP] section. Sounds like the 'run out
	of sockets problem'.
Barb