[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1546.0. "osf f/t FDDI MAC problem" by WELLIN::GRAHAM (Hopelessly Hopeful ! ) Tue Oct 11 1994 00:18

    I've got his on the OSF/1 f/t kit :-
    
    I want to look at the
    FDDI performance summary for the decbridge 900. So I drill down through
    the summary screen to the FDDI summary screen. On there is a facility
    to look at summary of FDDI traffic. Double clicking on this takes you to
    the FDDI MAC summary screen. On the right hand side just above the
    middle of the screen is two field in the traffic box. " frames= " and 
    "copied ="
    These values are permanently flashing at a very rapid rate. The value
    is not incremented until you do a refresh. These values should be written
    once and not be permanently flashing.
    
    
    	REgards,
    		Dave
T.RTitleUserPersonal
Name		DateLines