[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1532.0. "Thin Wire port on FL90 available?" by FSAEUR::RYE () Thu Oct 06 1994 05:01

  
Config Question: 

  When using a DEC90FL repeater in a hub configuration, the book refers to the
thin wire port being useable in the Hub90 backblane and not useable in the 
Hub900 Backplane.  Is this the correct information or perhaps a misprint ?

Thanks in advance.

Don
T.RTitleUserPersonal
Name		DateLines
1532.1NETCAD::SLAWRENCEThu Oct 06 1994 13:199
    
    In either hub, the thinwire T connector on the large flat upper surface
    (the one that would be up if the text on the front bezel is upright) is
    not usable - instead, that interface connects to the thinwire channel
    on the hub backplane.  
    
    The T connector is for when the repeater is used standalone with a
    separate power supply.