[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1480.0. "HUBWATCH V2.0: Fatal error at script line 664" by BIS5::RUTTENS () Tue Sep 27 1994 04:35

    My distributor just reported me an error one of his end-users encountered 
    installing Hubwatch V2.0 for Windows. The distributor successfully
    reproduced the error. I've installed myself multiple times V2.0 of
    Hubwatch and I never ran into this problem.
    Both the end-user and the distributor run with a COMPAQ pc and a 3com
    Etherlink III NIC (but I don't believe this has something to do with
    it).
    
    During the instalation procedure the installer asks clearance to change
    AUTOEXEC.BAT and CONFIG.SYS. After the "Go ahead and modify" the error
    windows pops-up with following message: FATAL ERROR AT SCRIPT LINE 664.
    
    Who can clarify this for me ?
    
    P.
T.RTitleUserPersonal
Name		DateLines
1480.1Need more infoNETCAD::WAGNERCOFFILThu Sep 29 1994 10:1610
    Please supply all information that the customer entered and at the
    exact point that the SCRIPT message appeared.
    Was it after the Modify the AUTOEXEC.BAT, the CONFIG.SYS, or the 
    WIN.INI? or modify the network parameters?
    Is the customer running with the HUBwacth IP stack?

    Line 664 is a display command for a text line on a dialog box. 
    Not likely the problem.

Barb
1480.2BIS5::RUTTENSThu Sep 29 1994 14:344
    I will try to get this info ASAP.
    
    Thanks