[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1474.0. "Filter and Probewatch" by GIDDAY::STANISLAUS () Mon Sep 26 1994 02:36

    
    
    	I want to capture using Probewatch for Windows and Packetprobe 90,
    Ethernet Packets between two MAC address for a packet type of 60-06.
    
    	I cannot find from the user manual how I specify a particular
    packet type although the manual on page 6-4 under filter list says you
    can have user-defined filters. How and where do I define my own filters
    for packet type.
    
    Alphonse

T.R Title User Personal
Name Date Lines

1474.1 Easy enough with new PROBEwatch, but no manual yet NAC::FORREST Fri Oct 28 1994 16:28 19

T.R	Title	User	Personal Name	Date	Lines
1474.1	Easy enough with new PROBEwatch, but no manual yet	NAC::FORREST		`Fri Oct 28 1994 16:28`	19
	60-06 sounds like a standard protocol (I can't remember which at the moment), so you should be able to use VIEW on the Filter Editor screen to find the Filter name. If your version of PROBEwatch doesn't have a Filter editor, then copy the latest eval kit from NAC::NIPG:[MANAGE.RMON.WINDOWS.DISK1] .DISK2 .DISK3 etc If there is no 60-06 filter existing, then use the ADD button on the Filter Editor screen to add it and give it a name. Then, if you want to view conversation statistics between the two nodes, you will have to add a Domain that includes this Filter. (A Domain may already exist - use the Domain Editor to look at Filters used). Once you have installed this domain on the DECpacketprobe, and enabled the HOST and Conversation groups, you can look for either Host in the Host table and zoom in on it to see the conversations with that packet type.

    60-06 sounds like a standard protocol (I can't remember which at the
    moment), so you should be able to use VIEW on the Filter Editor screen 
    to find the Filter name. If your version of PROBEwatch doesn't have 
    a Filter editor, then copy the latest eval kit from 
    NAC::NIPG:[MANAGE.RMON.WINDOWS.DISK1]  .DISK2  .DISK3 etc
    
    If there is no 60-06 filter existing, then use the ADD button on 
    the Filter Editor screen to add it and give it a name.
    
    Then, if you want to view conversation statistics between the two 
    nodes, you will have to add a Domain that includes this Filter. 
    (A Domain may already exist - use the Domain Editor to look at 
    Filters used).
    
    Once you have installed this domain on the DECpacketprobe, and enabled
    the HOST and Conversation groups, you can look for either Host in 
    the Host table and zoom in on it to see the conversations with that 
    packet type.