| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1264.1 | | NACAD2::HAROKOPUS | | Wed Aug 03 1994 12:19 | 15 |
| > Can I get counters for the ethernet ports on the DECbridge900
> using a management station such as DECmcc.
Yes using the SNMP AM
> If the above is possible when will it be possible to do it from
> HUBwatch.
>
HUBwatch V1.3 has a bridge port view that shows ethernet counters
amoung other things. Look for V1.3 in the September time frame.
Regards,
Bob
|
| 1264.2 | Digits transposed? | NACAD2::BATTERSBY | | Wed Aug 03 1994 12:37 | 3 |
| Uhmmmm you mean v3.1 Bob don't you?
Bob :-)
|
| 1264.3 | | NACAD::HAROKOPUS | | Sat Aug 06 1994 12:19 | 1 |
| Yes V3.1 unless I'm in a time warp.
|
| 1264.4 | Thanks | BIGUN::WULFF | | Mon Aug 08 1994 19:17 | 1 |
| Thanks for the replies.
|
| 1264.5 | | NACAD::ANIL | | Fri Aug 12 1994 13:06 | 6 |
| The DB900 supports the IETF Ethernet MIB, formerly RFC-1398 and
now RFC-1643 (STD50). Using any SNMP nms, such as MCC, you can
compile in this MIB and retrieve Ethernet-specific attributes
for ports 2 through 7.
Anil
|
| 1264.6 | DECmcc MTU Utility ->compileable MIB's wanted | VNABRW::PARGFRIEDER | | Tue Sep 06 1994 04:49 | 9 |
|
I am looking for a compileable version of RFC-1398 or RFC-1643.
Are there any online pointers?
Or are these RFC's included in any DEChub900 MIB's?
Thanks for help
Alfred
|
| 1264.7 | | NACAD::ANIL | | Wed Sep 07 1994 21:02 | 5 |
| Yes, on ftp.digital.com in /pub/DEC/hub900/mibs. Look at the README
file. (Or DECWRL::"/pub/DEC/hub900/mibs" for DECnet aficionados, however
this may not always work depending on the load on the ftp machine.)
Anil
|