[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1220.0. "HUB upgrade with TGV multinet" by CTOAVX::WOERNER () Wed Jul 13 1994 10:59

    	 Has anyone tryied to use TGV multinet on VAX/VMS to upgrade a
    DEChub 900. The upgrade worked fine using UCX but not with multinet.
    The DEChub 900 has two DB900mx moduals connected to an FDDI backbone.
    At first I suspected that I might have to redirect one of the front
    panel ethernet ports on the DB9000mx to the backplane of the DEChub 
    900 but when we tried the TFTP load from a node running UCX it worked
    fine. Is there a conflict between how HUBwatch V3.0 uses TFTP, or the
    way that NDU checks to see if an IP protocall stack is running. I
    copied the kit and procedures from 1008 and installed NDUplus under
    VAX/VMS v6.1
    	
    
    			any ideas would help
    
    
    				Thanks 
    
    					Tom
T.RTitleUserPersonal
Name		DateLines
1220.1Straight from the DECndu guru himself ... contact him directly if you still have problemsROGER::GAUDETBecause the Earth is 2/3 waterThu Jul 14 1994 15:3511
From:   NETCAD::DJERBAKA
To:     ROGER::GAUDET
CC:
Subj:   RE: NDU over TGV Multinet?

Roger,
        Please have him try the kit at:

        NETCAD::PROJ$706:[NDU.V3.RELEASE.VMS.POST_VMS_5_5]

-paul