[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1094.0. "Trap and DECHUB900" by PADNOM::PEYRACHE (Jean-Yves Peyrache Country Support Group France) Thu Jun 09 1994 09:27

 hi,


 using Hubwatch V3.0 for open vms , MAM V3.0 Decbridge900MX V1.2.1
Decconcentrator900MX V2.0.

  i tried unsucessfully to generated some traps messages and of course
   to display the result in the Viewer windows,
  just a simple trap "cold Start" from
   Decbridge900Mx
   Decconcentrator900Mx
   MAM

  does'nt  works ,same trap on Decagent90 v2.1.3 works as expected on the
 same station.

  are these traps are supported as well under these versions

  thanks for any comments

  Jean-Yves
T.RTitleUserPersonal
Name		DateLines
1094.1NACAD::HAROKOPUSFri Jun 10 1994 09:3114
    
    Do the DECbridge 900MX and DECconcentrator 900MX have 
    their own IP addresses?  This is required to receive traps
    from hub modules installed in the DEChub 900 since the
    MAM will not forward traps for the modules.  You will
    also need entries for these modules with traps enabled
    in the hubwatch alarmed agents file.
    
    I'm not sure why you aren't getting traps from the MAM.
    What are you using for an IP services module?
    
    Regards,
    
    Bob
1094.2Already checked...PADNOM::PEYRACHEJean-Yves Peyrache Country Support Group FranceFri Jun 10 1994 10:508
  Yes bob,

 all FDDI modules have ip address, Ip services Module is a Decrepeater900TM

  any others ideas/comments

   Jean-Yves
1094.3NACAD2::HAROKOPUSFri Jun 10 1994 11:275
    See note 1079.1 for some other possibilities.
    
    Regards,
    
    Bob
1094.4yet another note to check...NACAD::WILSONMon Jun 13 1994 12:184
See note 1079.2 for even more possibilities.

Regards,
Karen