[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

939.0. "Port and pin numbers on the 900BM" by CGOOA::CRICK () Wed Apr 27 1994 13:13

    Can someone please clarify the pin assignments on the DECrepeater 900BM
    telco connectors.  The diagram on page 3 of the installation guide has
    the numbers 1 and 12 beside the telco connectors.  Does this indicate the
    port number?  Also, why are the numbers (1, 12) not on the same side of
    the upper and lower telco connectors?
    
    I see from the actual module I have, that pin 1 is at the lower right
    corner of the telco connectors. Is that the RD- signal for port 24 on
    the lower connector?
T.RTitleUserPersonal
Name		DateLines
939.1NACAD::HERTZBERGHistory: Love it or Leave it!Wed Apr 27 1994 14:0114
    The numbers 1 and 12 do refer to the port numbers for each telco
    connector.
    
    The numbers are in the documentation only.  I believe they do not
    appear on the actual product bezel.  Don't know why they're not on the
    same side in the docs... maybe because the telco connectors are offset
    from each other (left to right)?
    
    Pin 1 in the lower right of the bottom connector is the RD- signal for 
    port B12.
    
    By the way, the 900BM was renamed to the 900GM quite some time ago.