[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

745.0. "HUB900: OBM & SLIP ..." by VNABRW::EHRLICH_K (Still, I'm sad ...) Mon Feb 21 1994 02:38

Hi,
	my customer - the greatest hospital here in Austria with a large
and complex network - has some questions about DEC HUB900 and OBM with SLIP.

Customer will do the following:
     DECHUB 900
   +------------+
   !     OBMport!
   +------+-----+
          S 
          L 
          I
	  P
     +----+-----+
     !  DS700   !
     +----+-----+
          !
          !
+---------+-------------------+---------------+ 
                              !
                              !
                         +----+----+
                         ! VAX 4060!
			 +---------+


Now he want's to connect to the OBM Port on the DECHUB 900 from the
VAXstation 4060 using IP (UCX/Telnet) via a port on a DECServer 700.

Is this possible? I've seen note 500 wich gives a definition about the
OBM Port configuration.

Many thanks for your kind support here! 

Best regards
Charly
T.RTitleUserPersonal
Name		DateLines
745.1Try note 703ARRODS::GILLJJohn, DTN 847-5849Mon Feb 21 1994 07:1711
    Charly,
    
    Although I have not tested this with a DS700 you should try the
    instructions detailed in the responses to note 703.  Pay particular
    attention to the cable specification between terminal server and SLIP
    port.
    
    Regards,
    
    John
745.2Sorry, I've missed this ...VNABRW::EHRLICH_KStill, I'm sad ...Mon Feb 21 1994 08:296
    Hi,
    
    	many thanks for your hint. I'll have a look at 703.*.
    
    Best regards
    Charly_from_CSC_Vienna
745.3YesQUIVER::SLAWRENCEMon Feb 21 1994 09:065
    Yes, it should work just fine.
    
    Let us know here if there are any additional hints we should add to the
    process.