[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

738.0. "DEChub ONE rack mounting" by ADO75A::BOUCHER (Reece Boucher) Thu Feb 17 1994 19:52

    Greetings,
    
    I believe that the DEChub ONE docking station is able to be rack
    mounted in a 19" rack.  Is this correct ?
    
    If so, do the mounting brackets come supplied with the DEHUA ?
    
    If not, what is the P/N ?
    
    Thanks in advance.
    
    Reece Boucher
    Adelaide, Australia

T.R	Title	User	Personal Name	Date	Lines
738.1	they're included	DELNI::GIUNTA		`Thu Feb 17 1994 20:04`	1
	The mounting brackets are included with the DEHUA.
738.2		UFP::LARUE	Jeff LaRue: U.S. Network Resource Center	`Tue Mar 22 1994 11:03`	5
	Is there any minimum clearance required for rack mounting modules when using the DEChub One? -tnx, Jeff
738.3	Minimum Clearance for DEChub One	KALVIN::SOHA		`Mon Mar 28 1994 15:02`	7
	Sorry for the delay in gettig back to you. There are no minimum requirements for Docking Station when used in a rack. However, the rack mounts, themselves, result in a minimum clearance because of the 30 thousands overhang on the brackets. Mike S.
738.4	Clearance for cable dressing perhaps?....	LEVERS::BATTERSBY		`Tue Mar 29 1994 11:59`	6
	Jeff are your inquiring about cable clearances when dressing cables that are to be connected to modules plugged into DEChub One's that are rack-mounted in cabinets? Mike, this may be what Jeff is after. Bob