[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

736.0. "Socket cannot be created" by ODIXIE::VANESSO () Wed Feb 16 1994 18:34

    I installed Hubwatch for Windows T2.5 and am having a problem when
    trying to run it.  I double-click on the hubwatch icon, the application
    comes up and asks me to specify agent.  When I enter the information, 
    I get the error: the socket cannot be created.  Error number returned:
    1001.
    
    I have a dechub900ms and a decrepeater900tm in the 8th slot.  During 
    configuration I entered the following:
    name of pc : pc170
    ip address of pc: 16.20.40.002
    ip address of default gateway (bridge): left blank
    local ip domain name: 16.20.40
    network subnet mask: 255.255.255.0
    your user name: chayes
    
    The ip address of hub: 16.20.40.001
    The ip address of repeater: 16.20.40.003
    community name: vbusa
    
    I am able to successfully ping the pc, hub, and repeater.
    
    Any help would be greatly appreciated.
T.RTitleUserPersonal
Name		DateLines
736.1check system.ini fileHLFS00::FOLKER_PMagis Futundum EstFri Feb 18 1994 06:1312
    I had the same experience when I restored an old system.ini file onto
    my PC. In this system.ini file the pcsa.drv and the decpw.386 where
    missing. (network.drv=pcsa.drv and network=xxxx,xxxx,decpw.386)
    
    I also find out that installing only the HUBwatch software didn't solve
    the problem. I had to install also the network files before the
    system.ini file was corrected.
    Perhaps this is something for the development fooks !!
    
    Regards Peter Folker
    MCS Eindhoven 
    The Netherlands.