[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

720.0. "900GM Patching?" by GLDOA::JSCHMIDT (Wire's Wire; Unless it's a Network) Thu Feb 10 1994 16:30

    Are there part numbers available for patching equipment (Cables,
    panels) for the new DECrepeater 900GM?
    
    Thanks
    
    Jim
T.RTitleUserPersonal
Name		DateLines
720.1see also 691.1DELNI::GIUNTAFri Feb 11 1994 21:328
    The BN26U-03 is a 50-pin Telco to 12 RJ's cable that can be used with
    the 900GM.  And there are industry-standard 50-pin to 50-pin cables
    which are readily available, but I'm not sure if they are offered 
    through DECconnect or not, and I don't have my catalog here with me.
    
    What exactly are you looking for?
    
    Cathy
720.2ThanksGLDOA::JSCHMIDTWire's Wire; Unless it's a NetworkMon Feb 14 1994 10:4316
    Thanks Cathy.
    
    The BN26U-03 will work for my solution.
    
    I have several customers who want to use RJ45 patching in the Wiring
    closets. They do not want to do the patching directly into the DEChub.
    The 50 Pin telco is a clean way of connecting the Patch Panel to the
    DEChub 900 Repeater. The problem I was trying to solve was connecting
    three 8 port patch blocks to two 50 pin telco connectors.
    
    The BN26U-03 along with the H3117-NA/NB or the  H3107-N will solve this
    problem.
    
    Thanks again,
    
    Jim