[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

681.0. "Failed to copy files for disk 1" by HGODCS::RICHARDLAM () Wed Feb 02 1994 03:22

    
    
    
    
    
    
    I tried to copy the HUBwatch for Windows V2.0 files for disk 1 using the 
    following command and found that the job never finished.
                                                                    
      $ spool copy nac::lenac_user:[networks.manage.windows2.disk1]*.* *
    
    Below is what I got when I did a DIR/SIZE on the destination directory:
    
    Directory SWS$DISK:[RICHARDLAM.DISK1]
    
    DISK.ID;1                 1
    HUBW10.001;1              0
    HUBW10.INF;1              0
    INSTALL.EXE;1             0
    LOGO.BMP;1                0
    
    Total of 5 files, 1 block.
    
    It appears to me that the batch job is stuck in copying HUBW01.001
    file.
    
    Any ideas ?
    
    Richard L
    (Hong Kong)
T.RTitleUserPersonal
Name		DateLines
681.1Command takes long time to finishHGODCS::RICHARDLAMWed Feb 02 1994 20:105
    
    It's working and did copy all the files as expected, but it took about
    7 hours using the command indicated though.
    
    Richard Lam