| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
After I install HUBwatch for window V1.1 on my PC. I got an error
when starting the MS-WINDOW :
VPKTDRVR: Virtual Packet Driver - Version 1.02g
VPKTDRVR: Copyright ........
: all right reserved
VPKTDRVR: Licensed to Digital ......
: other distribution or use prohibited.
VPKTDRVR: *** ERROR ***
: REAL-MODE INIT DID NOT FIND PACKET DRIVER
VPKTDRVR: NETWORK FUNCTIONS WILL FAIL
Note: DEPCA.DOS driver is being used.
VPKTDRVR.386 in in the correct directory (\HUBWATCH\CORE)
I double checked with the installing guide and reconfigured again but
still got the same error.
Anyone has some idea on this error !!
Thanks for any help.
Andy
HKMCS
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 491.1 | What type of Ethernet Card? | UTRTSC::GROOT_R | Ronald de Groot | Mon Nov 15 1993 11:26 | 3 |
What type of Ethernet Card do you use?
Ronald
| |||||
| 491.2 | problem solved but get another problem !! | HTSC19::ANDYNG | Sun Nov 21 1993 22:14 | 18 | |
The problem is solved. DEPCA.COM file is missing ...
After copy it to PC disk, ok.
Now I get another problem, I cannot PING any of the nodes after the
installation. If I start the HUBWATCH and try the AUTO DISCOVERY
(with a DECagent 90 connected to the PC), nothing is detected.
DECagent and HUBwatch uses the same subnet address and mask. community
string is PUBLIC for both read only and read/write.
I wonder if I did the setup correctly.
Any hint on setting up a DECagent so that the HUBwatch can see it.
Thanks
Andy
| |||||
| 491.3 | install on another PC, ok !! | HTSC19::ANDYNG | Tue Nov 23 1993 21:44 | 4 | |
install on another PC , ok.
Andy
| |||||