[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

397.0. "Two hubs connected by 90T ?" by HGOVC::GUPTA () Tue Sep 21 1993 22:55

    Will the following config work -
   
              DEChub 90	#1			      DEChub 90 #2
    	,--------------------,			,-------------------,
    	| 9 | 9 | 9 |        |			| 9 | 9 | 9 |	    |
    	| 0 | 0 | 0 | 	     |------------------| 0 | 0 | 0 |	    |
    	| T | T | T |	     |	  10Base2	| T | T | T |	    |
    	|   |   | L | 	     |			|   |   | L |	    |
    	`--------------------'			`-------------------'
          |
          | 10BaseT
          |
          |        DEChub 90 #3
    	,--------------------,		
    	| 9 | 9 | 9 |        |			                     
    	| 0 | 0 | 0 | 	     |          
    	| T | T | T |	     |			                     
    	|   |   | L | 	     |			                     
    	`--------------------'
    
    Can anyone point out if any configuration rules have been violated ?
    
    Regards,
    Gupta
T.RTitleUserPersonal
Name		DateLines
397.1works for meCGOS01::DMARLOWEdsk dsk dsk (tsk tsk tsk)Wed Sep 22 1993 13:155
    As long as the 10B2 is <= 55 meters and the 10BT is <= 100 meters,
    everything is ok.  You have 4 segments of which 1 is coax and 4
    repeaters between nodes on Hub #2 and Hub #3 (worst case path).
    
    dave
397.2Cross-cable between two 90TsHGOVC::GUPTATue Sep 28 1993 02:2910
    Ref .0:
    
    This config now works. We were trying with a wrong cable.
    
    The UTP cable linking HUB #1 and #3 needs to be cross.
    
    Thanks for the help.
    
    Regards,
    Surender