[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

346.0. "DEChub900 has BNC connector?" by TKOV51::HAYAKAWA (Kohei Hayakawa,DS/EIC/NIS/NT/SE, HUB5F) Fri Aug 20 1993 01:30

	I have a simple question about DEChub900.
	
	Does DEChub900 backplane have a BNC connector which is connected
	DEChub90 compatible thinwire segment?

	I believe that DEChub900 has it, because I remember looking at it in
	the Demo Center of Network Symposium held on February. But I cannot 
	fine it in DEChub900 Multiswitch Owner's Manual. 

		   DEChub900
               ________________
               |___        ___|
               ||M|        |P|| <- BNC connector here?
               || |        |_||
               || |           |         M: 900 module
               || |           |         P: Power supply
               ||_|
               |______________|   	

	Regards,
	Hayakawa

T.R	Title	User	Personal Name	Date	Lines
346.1	Nope	CONSLT::BUZZELL		`Fri Aug 20 1993 14:03`	7
	NO. There are no connectors for this type of connection on the 900 MultiSwitch. Interconnection of 900's or LAN's in the 900 should be done externally with the appropriate media.