| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
1. kept encountering following error and the application hanged:
Raima Data Manager USER error: -6
invalid db_address
OS errno = 0: Error 0
DLL=Raima Data Manager 3.21
usually happened when in the DECrepeater 90 configuration menu -
after enabling and disabling a port (mgt partition), and do a
'show repeater ports' or 'repeater port information'.
2. Occasionally, under the DECagent menu to reset (i.e. run a
DECagent self test and reset counter), the following screen
showed up:
Do you want to reset?
After clicking on the OK button, the same screen reappeared
and the application hanged. Need to reboot PC.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 255.1 | Repeater port information error | HGOVC::LILLIANTANG | Tue Jun 01 1993 05:08 | 6 | |
another problem noticed is the DECrepeater 90c repeater port
information - I have 2 stations, a PC (the hubwatch program), and
a VAX. The port for the PC had the MAC address for the VAX
(AA-00-....), and the port for the VAX showed the MAC address as empty.
Even if I manually changed them, the addresses were still incorrect
the next time I look at the same screen.
| |||||