[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

187.0. "Ip address required.... Why not domain name..." by CSC32::R_ROMMES () Tue Mar 16 1993 09:52

		On the VMS version of HUBwatch, without MCC, when I start 
hubwatch by typing, "watch/agent agent90" it returns, 

		ERROR: Agent IP address unspecified


		I realize that if I specifiy the address that all is well, but
are you going to eventually allow hubwatch to use the namespace , or the local 
host file ?




						Thanks, Rich.
T.RTitleUserPersonal
Name		DateLines
187.1Name-to-address translation: not in 1.1; perhaps in 2.0SLINK::HOODJust add waterWed Apr 14 1993 14:3118
For version 1.1 of HUBwatch (OpenVMS and ULTRIX), you'll need to specify the
IP address in your choice of:
	- command line
	- agents file
	- resource file

For version 2.0 (in a few more months), we'll try to do the IP address
translation thru the TCP/IP hosts file and nameserver.  You'll get a pop-up 
box for the remaining info, like community, timeout, and retries (probably 
with default values supplied).

This should also be the same pop-up window that will appear if you startup
HUBwatch without any parameters (in place of the annoying error message you
now get with 1.1).

Tom Hood
HUBwatch Development
227-3315
187.2SLINK::HOODThis is my new personal name for NotesWed Mar 08 1995 15:109
Almost two years later, but...

the nameserver lookup has been implemented for HUBwatch V4.0 for
OpenVMS VAX and for OSF/1 AXP.  Doing it for VMS and Unix was pretty
easy.  Doing it for Windows is quite a bit more complicated, so
HUBwatch for Windows probably will not support it.

Tom Hood
HUBwatch