| Greg,
Where does it say your Ethernet Address is at? Does it look like a
valid Ethernet address?
The fact that you are not able to Ping anything suggests that you
dod not install your drivers properly. FWIW that is the most difficult
part of the HUBwatch installation. This is not a HUBwatch fault but
just part of life on a PC.
Some quick things to check:
* did you modify your autoexec.bat and config.sys as
described in the README icon in HUBwatch?
* did you CONFIGURE your NETDEV.SYS file correctly? If you
are not seeing a valid Ethernet address coming up, this one would be my
bet.
Let me know how you make out, and I'll help as I can. Let's do it
here so that others can benefit.
regards,
Mark
|
|
The informational messages during boot are, i get no
errors:
Packet driver is at segment 0ACC
Interrupt number 0x5 (5)
I/O port 0x300 (768)
Memory address 0xCC00
My ethernet address is 08:00:2b:27:42:6a
My AUTOEXEC.BAT is:
C:\WINDOWS\SMARTDRV.EXE
@ECHO OFF
C:\hubwatch\depca 0x69 5 0x300 0xcc00
PROMPT $p$g
PATH C:\WINDOWS;C:\;C:\DOS
SET TEMP=C:\SWAP
SET DOSX=swapdir c:\swap
SET NVTWIN=1
MODE CON CODEPAGE PREPARE=((865) C:\DOS\EGA.CPI)
MODE CON CODEPAGE SELECT=865
LH KEYB DK,,C:\DOS\KEYBOARD.SYS
LH C:\MOUSE\MOUSE
LH C:\DOS\DOSKEY
rem call \DECNET\startnet SELECT LOGON
My CONFIG.SYS is:
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE RAM I=E000-E999
FILES = 30
BUFFERS = 20
STACKS = 9,256
DOS=HIGH,UMB
COUNTRY=045,,C:\DOS\COUNTRY.SYS
shell=\command.com /P /E:1024
DEVICEHIGH=C:\DOS\DISPLAY.SYS CON=(EGA,,1)
lastdrive=z
REM device=\decnet\laddrv.sys /D:5
device=c:\hubwatch\netdev.sys
With the CUSTOM NETDEV command, I added my own IP address
(16.181.64.253) and 0 as the number of subnet bits
(subnet mask 255.0.0.0).
The h/b option was set to 300, and the h/v option to 5
I still can't PING anything....
Best regards,
Greg Parker, Denmark
|
| Did this problem ever get resolved?
I have a similar problem/
The packet driver seems to be loaded and find the ethernet address, but
when I start windows it complains that it can't find the packet driver.
Also ping doesn't work and says that the packet driver isn't loaded
which seems a little weird.
I have a DECstation 316 with a depca in it.
thanks,
Mike
|