[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

82.0. "Help me on DEChubmanagement" by UTROP1::LIETHOFF_S (Stef Liethoff @UTO) Wed Nov 18 1992 05:52

    Hello
    
    Why should I configure a DEChub 90 with both a DECbridge and a DECagent
    for networkmanagement using HUBwatch and DECmcc. Or is DECagent
    sufficient.
    
    					Stef Liethoff
    					DEC Holland

T.R Title User Personal
Name Date Lines

82.1 DECbridge90 + DECagent90 = Repeater Mgmt CSOA1::FISHER The harvest is great, but the laborers are few Thu Nov 19 1992 07:57 10

T.R	Title	User	Personal Name	Date	Lines
82.1	DECbridge90 + DECagent90 = Repeater Mgmt	CSOA1::FISHER	The harvest is great, but the laborers are few	`Thu Nov 19 1992 07:57`	10
	There is a 'management' bus across the backplane of the DEChub90. The Repeaters connect to that bus. The only way to access the bus right now is with the DECbridge 90. Therefore you need both the DECagent 90 somewhere in the network and a DECbridge 90 for every DEChub 90 panel (or two if they're daisy-chained). AL

    There is a 'management' bus across the backplane of the DEChub90. The
    Repeaters connect to that bus. The only way to access the bus right now
    is with the DECbridge 90. Therefore you need both the DECagent 90
    somewhere in the network and a DECbridge 90 for every DEChub 90 panel
    (or two if they're daisy-chained).
    
    AL